BC-GB – Gaming & Esports News & Blog

Large Country House Minecraft Build Tutorial

Base

The stone brick frame is 6 x 17. The door width is 3 blocks wide.

Base

Adding walls, front

Add oaklog pillars, stone brick walls and spruce stairs

Adding walls, side

Add oaklog pillars, stone brick walls and spruce stairs

Adding walls, back

Add oaklog pillars, stone brick walls and spruce stairs

The details – Front

1. Fences in the window 2. Leaves 3. Signs around the leaves 4. Trapdoors 5. Spruce stairs above window 6. Torches on the oak log pillars.

The details – Side

The details – Back

1. Fences in the window 2. Leaves 3. Signs around the leaves 4. Trapdoors 5. Spruce stairs above window 6. Torches on the oak log pillars.

The details – Back

This is the center window of the back of the build. 1. Add fences 2. Add stone brick slab under the window 3. Add stone brick stair above the window.

Next floor

1. Add stone brick pillars on the spruce stairs pointing out from the build. 2. Add oak logs so they are “resting” on the rest of the spruce stairs.

Next floor

1. Add stone brick pillars on the spruce stairs pointing out from the build. 2. Add oak logs so they are “resting” on the rest of the spruce stairs.

Next floor – Side

1. Add stone brick pillars on the spruce stairs pointing out from the build. 2. Add oak logs so they are “resting” on the rest of the spruce stairs.

The walls – Front

1. Fill in the walls with light gray stained clay

The walls – Side

1. Fill in the walls with light gray stained clay

The walls – Back

1. Fill in the walls with light gray stained clay

Add details – Front

1. Fences in the window 2. Leaves 3. Signs around the leaves 4. Trapdoors 5. Spruce stairs above window 6. Torches on the oak log pillars. 7. Flower pot with a rose in the middle window 8. Add Spruce stairs on the top of the stone brick pillars.

Add details – Left side

1. Fences in the window 2. Leaves 3. Signs around the leaves 4. Trapdoors 5. Spruce stairs above window 6. Torches on the oak log pillars. 7. Add Spruce stairs on the top of the stone brick pillars.

Add details – Back

1. Fences in the window 2. Leaves 3. Signs around the leaves 4. Trapdoors 5. Spruce stairs above window 6. Torches on the oak log pillars. 7. Add Spruce stairs on the top of the stone brick pillars.

Add details – Back

This is the center window of the back of the build. 1. Add fences 2. Add stone brick slab under the window 3. Add stone brick stair above the window.

Add details – right side

Added a balcony using fences, stairs and half slabs. Add Spruce stairs on the top of the stone brick pillars.

Add details – right side

Added a balcony using fences, stairs and half slabs.

Corners

Add a stone brick half slab in each of the four corners.

Final Floor

1. Add stone brick pillars on the spruce stairs pointing out from the build. 2. Add oak logs so they are “resting” on the rest of the spruce stairs. 3. Add oak logs on top of the stone brick half slab in the corners.

Final Floor

1. Add stone brick pillars on the spruce stairs pointing out from the build. 2. Add oak logs so they are “resting” on the rest of the spruce stairs. 3. Add oak logs on top of the stone brick half slab in the corners.

The walls and details – front

1. Fill in the walls with white stained clay 2. Fences in the window 3. Leaves 4. Signs around the leaves 5. Trapdoors 6. Spruce stairs above window 7. Torches on the oak log pillars. 8. Add Spruce stairs on the top of the stone brick pillars.

The walls and details – left side

Added a balcony using fences, stairs and half slabs. Add Spruce stairs on the top of the stone brick pillars.

The walls and details – back

1. Fill in the walls with white stained clay 2. Fences in the window 3. Leaves 4. Signs around the leaves 5. Trapdoors 6. Spruce stairs above window 7. Torches on the oak log pillars. 8. Add Spruce stairs on the top of the stone brick pillars.

The walls and details – right side

1. Fill in the walls with white stained clay 2. Fences in the window 3. Leaves 4. Signs around the leaves 5. Trapdoors 6. Spruce stairs above window 7. Torches on the oak log pillars. 8. Add Spruce stairs on the top of the stone brick pillars.

The corners

The roof

Add 1 stone brick on each of the stairs pointing out on the front and the back side of the build

The roof

Place oak logs on the front and the back of the house, again so they “rest” on the spruce stairs. Fill in stone brick stairs as shown.

The roof

Place stone brick stairs on the stonebricks. Place a spruce plank behind the stone brick stairs

The Roof

Create this frame

The Roof – stone-brick layer

Add planks where the wooden stairs are

The Roof

Place stone bricks on each plank

The Roof

Place stone brick stairs to cover the rest of the planks.

The Roof

Use half slabs on the top part of the roof.

The Roof

Use half slabs on the top part of the roof.

Top windows

Add oak logs like this

Top windows

Fill the small gap on the sides with spruce planks

Top windows

Add oak logs

Top windows

Add white stained clay

Top windows

1. Fence for windows 2. Leaves 3. Signs around leaves 4. Spruce wood stairs

Top windows

Repeat on the other side aswell

Roof windows

Remove 4 stairs and the two planks centered above

Roof windows

Add stone brick half slabs on the side and stairs in the middle

Roof windows

Add cobble fences, stone brick stairs and half slabs.

Now it should look like this

Now it should look like this

Now it should look like this

Now it should look like this

Inside – Base Floor

Now, I won’t decorate the inside, just want to show you how I chose to fill the walls and the floors.

Base Floor

Base Floor

I used spruce half-slabs

Filled the floor

Base Floor

Added oak pillars on the back wall, base floor

Base Floor

Filled with stone-bricks, entrance

Next floor

I filled it with oak logs and light gray clay as shown.

Next floor

I filled with spruce half slabs and added some beams by the oak pillars.

Next floor

I filled with spruce half slabs and added some beams by the oak pillars.

Next floor

I filled with spruce half slabs and added some beams by the oak pillars.

Next floor

I filled with spruce half slabs and added some beams by the oak pillars.

Next floor

I filled with spruce half slabs and added some beams by the oak pillars.

Next floor

I filled with spruce half slabs and added some beams by the oak pillars.

Final Floor

Added oak logs

Final Floor

Added oak logs

Final Floor

Filled with white stained clay Done! Have fun decorating!

contributed by /u/Astriii

Exit mobile version